KWWS VOL200 Digital - Flipbook - Page 90
DUST COLLECTION
Fein Turbo I Hepa Pro Set
I-Socket Autoswitch Workshop
• High performance turbine for
151 cfm (71 l/s) flow rate and 98.4" of water lift
(245 mbar vacuum)
• Low volume of 66 dB
• Large wheels rotate 360° for optimal
maneuverability, even in tight
conditions
• Tool coupling with suction
control for easy control of
suction power
• Autostart outlet with power-on
delay to prevent current
spikes
• Practical storage area
with rim
With the i-Socket, you will have
instant, tool activated dust collection with your hand held
power tools. Simply plug the
i-Socket into you wall outlet,
plug in the power tool and the
shop vac into the appropriate
sockets and you will have dust
collection when you turn on the
tool. Your vac will continue to
run for approximately 7 seconds after you turn off your tool.
The perfect accessory for many shop power tools.
TURBO I HEPA PRO SET
Contractor Saw Dust Collector Bag
Power consumption: 1,100 Watts
Capacity: 5.8 gal
Power Cord: 19 ft & Vacuum Hose: 13 ft
Weight according to EPTA: 17.9 lbs
I-SOCKET AUTOSWITCH WORKSHOP
DG12000 ....................................................$49.95
FE92037 ............................................. $499.95
FEIN TURBO VAC
ACCESSORY SET
2 Suction Tubes,
Combination Nozzle,
Crevice Nozzle, Round
Brush, Elbow Handle
FEIN PERMANENT FILTER
FLEECE TURBO I & II
FE64010 ...........$128.95
The Dust Cutter Dust Collection bag fits any contractor
saw type machine that has an enclosed motor and a base
measurement of up to 23" W x 19" D. The bottom of the
bag has a zipper to allow for easy cleaning without removing the bag from the saw. Leaving the zipper undone, a
funnel is created that will drop the dust into a pan or container of your choice. With the zipper closed, you can also
connect either a 1-1/4" or 2-1/2" dust collection hose to the
bag. Use gravity or suction, the choice is yours.
Adjustable Vacuum Adapter
DUSTOPPER
PRO KIT
DT10000 ...$59.99
Dust Collection
Accessories Kit
DUST COLLECTION ACCESSORIES KIT
WK37560 ............................................$129.95
90
Turn on your dust collector from up to
50' away with a Long Ranger remote
switch
110V STARTER
PI11030 ......... $99.95
220V STARTER
PI22030 .......$119.95
Dust Hose Hangers
Metal hose hangers are mandatory for a properly installed
dust collection system. They
not only keep the hose in place
and out of the way, but they
also provide a place to help
conceal the grounding wire.
2-3/4"
3-1/4"
4-1/4"
WK21050 ............................ $1.95
WK21060 ............................ $1.95
WK21070 ............................ $1.95
Filter Dustbag
Adjustable Vacuum Adapter
With this Dust Collection Accessory Kit, you are basically
adding an upright vacuum cleaner to your dust collection
machine. It connects directly to you 4" dust collection hose.
The kit includes a 4" quick connect blast gate, bench brush
attachment, floor sweep attachment with swivel caster, quick
connect coupler, quick connect hose attachment, two adjustable handles, four mounting brackets and a 4" x 3' clear pipe.
draws 660 CFM, this unit
has more than enough vacuum
power for big chip makers, like jointers
and planers. Also, with built-in casters and a handle, moving it about is easy. The 60-105 features an adjustable pipe
extension with chip collecting funnel that can be positioned
high for use with lathes, drill presses, workbenches etc. It
also includes a 2 micron cloth filter bag, 108" long x 4" dust
hose, adjustable pipe & funnel attachment system, safety
on/off switch, and wall mounting brackets.
Long Ranger Remote
DUST CUTTER DUST COLLECTION SYSTEM
FOR CONTRACTOR SAWS WS15000 .....$32.99
FE71020 ............................................. $119.95
Rikon’s 1 HP Portable Dust
Collector is a great size for many
uses in the small shop. With a single
4" dust port
that
PORTABLE DUST COLLECTOR 1HP
RK60105 ......................................................$349.99*
* $30 Additional Shipping Charge
FEIN ACCESSORIES
FLEECE FILTER BAGS
9-92-27 5PK FE31345....$49.95
9-20-28 5PK FE62010 ...$60.95
OLDER MODEL FEIN PAPER
DUST BAG 3PK
TURBO I FE13038 ......$26.95
TURBO II FE13036 .....$28.95
Rikon Portable
Dust Collector
The UNI-VAC is the ultimate shop vacuum accessory. The
super flexible rubber grips around most sizes and shapes
of vacuum ports. Adapts to most table saws, routers, miter
saws, sanders, and the list goes on! The innovative locking
teeth allow you to secure the UNI-VAC in place. The fixed
end attaches around all vacuum hoses with an inner diameter (ID) of 2-1/4" such as RIGID® Hose. Another great
innovation, designed by a cabinet maker!
UNI-VAC ADJUSTABLE VACUUM ADAPTER
FP10000 ......................................................$19.95
This 1 micron top bag fits various size
dust collectors and allows plenty of air
flow while remaining 99% efficient.
FILTERING TOP BAG
1 MICRON FILTER DUSTBAG
15" BH11761 ................$39.95
14" BH11763 ................$36.95
20" BH11765 ................$59.95
DISPOSABLE BOTTOM
CLEAR DUST BAGS 5PK
14" D X 32"
BH11778 ................. $10.95
20" D X 42"
BH11781 ................. $18.95
19.5" D X 33"
BH11789 ................. $12.95
14" BAND CLAMP BH11775 ................. $17.95
20" BAND CLAMP BH11777 ................. $24.95
Have Questions? Call 8am to 5pm EST: 800-228-0000 • ORDER ANYTIME AT 800-228-0000
