KWWS VOL200 Digital - Flipbook - Page 72
MEASURE & LAYOUT
Kreg Multi-Mark
Marking Gauge
Traditional marking gauges are a must in any shop.
The most practical is the beech gauge. It's 100% beech
and measures 8" overall. The next step up is the rosewood marking gauge. It has polished brass in the wear
areas along with a brass, tightening knob.
VIDEO ONLINE
The Kreg Multi-Mark™ is an incredibly handy multi-purpose marking and measuring tool, perfect for a wide
variety of household and jobsite applications. The MultiMark™ features three different scale configurations, a
built-in level, a handy 3/16" reveal gauge, and much
more. Whether you need to transfer a measurement for
that last ceramic tile, layout some mitered corners, or just
straighten a few simple picture frames, the Multi-Mark™
is the only tool you'll need to get the job done!
KREG MULTI-MARK KR29000 ................$19.99
Pencil Compass & Divider
Pencil/Compass Scribers are
handy in carpentry and woodworking. This heavy duty compass will mark a circle up to 9"
diameter. It can be used as a
scribing guide for edges and many
other layout operations. Made of
die cast metal and is rust resistant.
BEECH
CN00135 ........ $15.95
ROSEWOOD & BRASS
CN00138 ............$42.95
Marking Knife
This marking knife features a
hardened and tempered
carbon
steel blade and
rosewood
handle. It is ideal
for various marking
applications,
everything from tails and
pins
to
straight cut lines.
Center Rule
Ruler side has a center rule on top in
32nds and left to right on the bottom
in 16ths. Bevel gauge side has an
angle scale from 0° to 50° with 1/2°
marks and 1/4° dots for easy reading
and a 3" rule on the end. Aluminum
construction with black anodize finish
12" CENTER FINDER & BEVEL
RULER IP34222 ...........$18.95
The hook rule is a heavy duty, engraved rule is hardened
stainless with a satin chrome finish. One side is marked
8ths and 16ths while the other is marked in 32nds and
64ths. The hook on the end can be switched to either side.
12" HOOK RULE SATIN CHROME
IP34012 ........................................................$14.95
2" MARKING KNIFE RH CN00112 ..... $16.95
12" x 1" Two sided rule measures in 8th, 16ths on one side
and 32nds and 64ths on the other
Professional Wheel Marking Gauge
12" STAINLESS STEEL RULER IP34007 .. $5.95
PENCIL COMPASS &
DIVIDER
GE84200 ................... $8.95
Mite-R-Gage
With the MiteR-Gage, you
can measure and lay out all types
of angles, both inside and out, check corners for square, check and set table saw
blades and more. The markings are
paint filled and very easy to read
and the
gage can be locked in
any position. To
maximize ease of
use and versatility, the
Mite-R-Gage has
two scales. Inside or outside
angles can be
measured and read quickly and accurately to an accuracy of 0.25 degrees.
MITE-R-GAGE NL10000................... $24.95
Contour Gauge Easily
Duplicate Complicated Profiles
Transfer and duplicate
irregular shapes
with precision using
these contour
gauges. They
a r e
ideal for any
kind of flooring,
installing tile,
trim carpentry
and also perfect for
woodworking
as well as auto body repair,
model making,
pottery and clay modeling. Designed to enable precision
cuts and eliminate wasteful miss cuts. Constructed from
ABS plastic for increased durability and strength
CONTOUR GAUGE
20"
BH19062 ...................................$34.95
10"
BH19063 ...................................$22.95
5"
BH19064 ...................................$22.95
72
The grain will not effect this marking gauge.
WHEEL MARKING GAUGE WK28220 ....$18.95
Point 2 Point
How do you divide a span of wood - or any other material - into
several equal parts instantly without the use of calipers, a ruler
or calculator? Just expand then contract the Point 2 Point
to give an instant visual guide to locations. Quickly work out
the correct number and position of dowels, screws, pins, or
calculate the maximum number of strips that can be cut from
a board. The Point 2 Point has a 4-point brass locking mechanism enabling you to transfer your locked measurements
between boards or over large areas. Designed for both right
and left-handed use with a maximum expansion of 2ft.
POINT 2 POINT MK2 MR00022 ............$34.95
Engineer's Square
This handy, compact square is ideal for checking
fence angles, saw blade angles and other critical alignments or just the everyday marking of
lumber. The blade measures 1" x 5-7/8" and is
non-graduated.
6" ENGINEERS SQUARE BH19058 ......$20.95
6" x 5/8" is ideal for the small tool kit or pocket. Each side
is fractional with 1/8" & 16ths on one and 32nds & 64ths
on the other
6" STAINLESS STEEL RULER IP34006 .... $3.95
14" Digital Angle Rule
Our 14" Digital Angle Rule can
be used for many
applications. It
will enable you
to accurately set
angles on everything
from miter gauges, table saw
blades to miter saws. It is an excellent tool for
those doing trim carpentry. The digital Protractor can be
zeroed out at any point and can be changed where you
can read it from either end.
14" DIGITAL ANGLE RULE IP35412 .....$29.95
6" Digital Multi Gauge
With this Digital Multi
Gauge, you will be
able to measure
heights and depths in
a variety of applications. The gauge will
measure a bit or blade
height to 3" and depth
below the surface of
2.9". An easy to read
digital display shows
measurements in inch,
fractional or metric
readings. Accuracy is
.001" per 1" of travel.
DIGITAL MULTI GAUGE 0-6"
IP35096 ................................................. $20.95
Have Questions? Call 8am to 5pm EST: 800-228-0000 • ORDER ANYTIME AT 800-228-0000
