KWWS VOL200 Digital - Flipbook - Page 64
FINISHING - POLISH
Wood Wax for Cutting Boards
U-Beaut EEE Ultra
Shine Paste Wax
Handcrafted with Beeswax, Coconut
Oil, Mineral Oil, and Vitamin E. It can
be used as a standalone product
or after applying a layer of our
Cutting Board Oil. Wood Wax will
add extra protection from water
and moisture while bringing out
more vivid wood color and shine.
Simply apply a thin layer of wax, dry
for 15 minutes, then buff with a rag.
CA Wood Finish Kit
Ultra Shine contains ultra fine abrasives that will enhance a 240 grit
sanding step to 1200 grit or more and
enhances a 400 grit finish to 2000 grit!
U-BEAUT EEE ULTRA SHINE PASTE
WAX 8.4 OZ PI10002 ............$34.95
WOOD WAX FOR CUTTING BOARDS .75OZ
WL75000 .................................................... $5.99
Shellawax Friction Polish
Turners - You'll Love The Look Of
This Finish
Shellawax has become the favorite among
many of our lathe turners who marvel at its
simplicity. Just shake vigorously and spread
over the piece, then buff with a cloth while the
piece is spinning. Many other polishing techniques can be used with Shellawax to add
a high sheen gloss to that special project.
NO AIR SHIP
Pioneer Wood Patina
Turn New Wood Into Old Wood
Pioneer Wood Patina is a safe,
water based powder concentrate.
When applied to new wood this
product gives the surface a "barn
wood" patina. Gives any home
project, interior or exterior, that
warm, rustic, barn wood look.
Perfect for contractors and DIY
projects such as siding, decking
and hand rails, interior accent
walls and furniture.
PIONEER WOOD PATINA
Quart PN00201 ....................................$5.99
Gallon PN00202 ...................................$18.99
SHELLAWAX FRICTION
POLISH
8 OZ PI10000 ................$39.95
1 OZ SAMPLE PI10003 ...$7.95
NO AIR SHIP
Mirror Coat Bar Top Coating
Easily Create High-Gloss Clear Coatings
Shellawax Cream Friction Polish
Applies smoothly and consistently
on your work and provides a flawless non streaking finish on large
and small turnings. Its creamy
consistency makes it easy and
safe to apply. Buffs to a rich deep
durable shine on wood carvings
or flat wood. Non-toxic and water
resistant when dry.
SHELLAWAX CREAM POLISH
8.45 OZ PI10001 ...........$39.95
NO AIR SHIP
Penthouse Polish Aerosol
Have you ever been in a
bar or a restaurant and
noticed money, seashells
or other items suspended
in the finish of a table or
other surface? The finish is
Mirror Coat. Mirror Coat is
a 2 part epoxy resin system
specially designed to create
high-gloss, clear decorative
coating for wood and other
materials. Unlike most bar
top coatings, Mirror Coat is
mixed in a ratio of two parts
resin and one part hardener.
This 2:1 ratio makes for a
much harder and more heat resistant coating than typical
bar top coatings.
MIRROR COAT
SY00031 ......................$39.95
1-1/2 PINT
1-1/2 QUART SY00032 ......................$64.95
NO AIR SHIP INTERNATIONAL
Penthouse Furniture polish is a high quality
product for maintain the beauty of the finish
on fine furniture. Penthouse will clean smears,
smudges and prints while leaving a durable
gloss wax protection.
PENTHOUSE POLISH AEROSOL
M1070333 ........................ $12.99
NO AIR SHIP
Woodturners Finish Ready To Apply
While Working The Lathe
NO AIR SHIP
Wood Turner's Finish
General's Wood Turner's Finish is a non
toxic water/oil urethane hybrid designed
for use on wood turnings, salad bowls
and other lathe projects. It produces a
rich amber tone that can be polished to a
high gloss. It can be wiped, brushed or
sprayed. The final coat can be buffed with
superfine or ultrafine sanding pads. Thin
coats can dry in as many as 30 minutes
while thicker coats can take up to 1 hour
before recoating.
WOOD TURNER'S FINISH
Now available from Klingspor's Woodworking Shop
is a time saving finish for wood turners. Wood Turners
Finish is a fast drying, ready to use finish designed to
be applied to turning objects while they are still on the
lathe. This specially formulated finish dries fast and
resists runs, drips and errors and its finish is dry to the
touch in minutes and can be recoated or displayed.
CALIFORNIA
RESTRICTED
DELIVERY
NO AIR SHIP INTERNATIONAL
WOODTURNER'S FINISH
PINT M61108885 .................................$32.99
NO AIR SHIP
Wood finishing with cyanoacrylate is easy,
fast and durable
due to an extended application
time of up to
60 seconds
and its' built
in flexibility.
This
high
build coating
creates an
extremely durable finish
with an actual sheen that ranges from satin to
high gloss depending on the number of coats and the type of
sanding or polishing. There are many application techniques
used in cyanoacrylate finishing and this new CA Wood Finish
Kit can be used for all of them. Kit includes: 1 oz CA Wood
Finish-Thin, 2.5 oz CA Wood Finish-Medium, 3 oz Aerosol
CA Activator, 1 oz CA Polish Satin, 1 oz CA Polish Gloss,
400g mesh abrasive, Application instructions
CA WOOD FINISH STARTER KIT
CA00575 .............................. $32.99
NO AIR SHIP
Myland's Polish
& Sealers
Premium Products
From A
Trusted Name
NO AIR SHIP
LACACOTE SANDING SEALER - This shellac based
product is formulated to take advantage of the natural
attributes of shellac such as clarity, adhesiveness, sealing
and fast drying. On naturally oily woods, lacacote sanding sealer seals in the oils that typically preclude certain
finishes from drying. It also effectively seals the oils and
silicones from polishes and stripper residues often found in
refinished woods. It's a great sealer to use before wax and
is also widely used in woodturning applications. 500 ml
MY10000 ............................................................$32.95
HIGH BUILD FRICTION POLISH - This shellac
based friction polish requires no sealing before application
and gives an exceptionally high build which dries almost
instantaneously resulting in a beautiful, smooth sheen that
compliments the natural beauty of the wood. A brilliant high
gloss finish can be achieved by first sealing the work with
cellulose sanding sealer. 500ML MY20000 ......$32.95
CELLULOSE SANDING SEALER - Myland's
Cellulose Sanding Sealer is a clear sealer, particularly suited for turned items, that when used alone, dries to a matt,
natural looking color. When used prior to application to High
Build Friction Polish, an exceptionally high gloss finish can
be achieved. MY30000 ......................................$31.95
MYLAND’S WAX MY40000 .............................$24.95
MYLAND’S SAMPLER KIT: 1 each of the above 3
items and Myland’s Wax MY49999 .................$99.95
MELAMINE LACQUER - Another finish option to use
after sealing with cellulose sanding sealer is the melamine
lacquer. It’s an ideal top coat for small items which are finished on the lathe. It’s easy to apply and durable leaving a
semi-gloss sheen. - 500 ml MY60000 ..............$32.95
8 OZ
GF90360 ................................ $18.95
64
Have Questions? Call 8am to 5pm EST: 800-228-0000 • ORDER ANYTIME AT 800-228-0000
