KWWS VOL200 Digital - Flipbook - Page 107
HARDWARE
Kreg Concealed Hinge Jig
The Kreg Concealed
Hinge Jig lessens the
chances for mistakes while speeding up the process
of drilling cabinet
doors for concealed hinges.
This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great
and work well. Plus, the Concealed Hinge Jig works with an
ordinary drill and the included 35mm carbide tipped bit.
KREG CONCEALED HINGE JIG
KR03217 ................................................$39.99
Kreg Cabinet Hardware Jig
The Kreg Cabinet Hardware
Jig takes the guesswork out
of installing cabinet knobs
and pulls. The moveable
edge guide, measuring scales
and adjustable drill guides
make it easy to precisely position holes and ensure perfect
knob and pull positioning every
time. This is the perfect for new
construction and for refreshing entire rooms.
KREG CABINET HARDWARE JIG
KR03218 ............................................... $39.99
Kreg Cabinet
Hardware
Jig Pro
Whether you’re installing one new knob or dozens of large
pulls — from 1-3/4" to 12" center to center — the Cabinet
Hardware Jig Pro is the go-to choice for ensuring professional-grade accuracy and consistency every time. A movable
end stop and built-in measuring scales (with imperial and
metric markings) make it easy to position knobs and pulls
precisely.
KREG CABINET HARDWARE JIG PRO
KR12386 ................................................ $49.99
Cabinet Door
Mounting Jig
Cabinet Mate Shelf Pin
Drilling Guide
This easy to use, lightweight
and durable jig is a great
alternative to shop made
jigs, which typically wear out
after just a few uses. The
CabinetMate™ has a rigid
main body, an indexing pin
and a self-centering drill bit.
A custom spring-loaded-brad
point drill bit allows the holes
you drill to self-center with the
holes on the main body. This
bit is pre-set to bore a crisp
hole with consistent depth for a perfect fitting shelf pin.
The CabinetMate also comes with a built in storage compartment for your bits.
CABINETMATE SHELF PIN DRILL GUIDE 1/4"
WS1316B ....................................................$27.99
SHELF PIN BIT 5MM WS2312B .............$11.99
SHELF PIN BIT 1/4" WS2313B ..............$11.99
Shelf Pin Jig
Create perfectly spaced
shelf-pin holes with the
Kreg Shelf Pin Jig. It has
six hardened-steel guides on
1-1/4" (32mm) centers and
at backspacing that matches
the 32mm cabinet system.
A dual-position fence aligns
the jig or can be removed to
work inside a structure. This
jig can also simplify installing
concealed hinges and drawer slides in frameless cabinets. Two versions are available: one with a 1/4" bit, one with a 5mm bit.
KREG SHELF PIN JIG 5MM BIT
KR03232 ................................................... $39.99
KREG SHELF PIN JIG
1/4" DRILL BIT
KR03225 .............. $39.99
1/4" SHELF PINS 20PK
KR11020 .............. $12.99
5 MM SHELF PINS 20PK
KR11037 .............. $12.99
Complete Magic Shelf
Support System
Get a much-needed helping hand for
installing cabinet doors
with the Kreg Cabinet
Door Mounting Jig
offers. The jig features
a support arm that helps
you hold the door with one hand,
while your other hand is free to mount the
hinges to the cabinet. The Cabinet Door Mounting Jig allows
you to mount left-hand and right-hand cabinet doors in any of
nine different positions—from inset to 2" overlay at 1/4" increments. The jig works with face-frame and frameless cabinets.
Included 1/16" and 1/8" shims allow micro-adjustment up to
3/16" during installation.
Selby's best-selling Complete
Shelf Magic Shelf Support System
offers yet another example of hardware wizardry! The shelves will
look like they are floating.
In order to entirely conceal
the hardware, the shelf
must be at least
1-1/4" thick. Includes 1 mounting bracket, 1 support
rod, 6 screws and 6 plastic screw anchors. Mounting/
Installation: Screw anchors are placed in the wall in 6mm
(15/64") holes and the mounting bracket is affixed to them.
The support rod is fixed to the mounting bracket with set
screws that are vertically and horizontally adjustable. Holes
(12mm diameter x 3-5/8" deep) are drilled into the rear of
the shelf to seat the rod. For full concealment, a 7/8" wide
groove x 3/16" deep may be cut into the shelf back. 90 pound
capacity per pair.135 pound capacity with three.
CABINET DOOR MOUNTING JIG
KR11044 ................................................... $39.99
COMPLETE MAGIC SHELF SUPPORT
SYSTEM SL60333 ........................................$8.95
Kreg Drawer Slide Mounting Tool
The Kreg Drawer Slide Jig is essentially the extra set of
hands needed when installing drawer slides. This easy-to
use jig holds ball bearing, epoxy coated and under mount
slides in position as you drill mounting holes in the cabinet.
Once the slides are fastened to the cabinet box, the jig can
be reversed to support drawer boxes while mounting slides
to the drawer. Slides of 12" and longer are compatible and
the jig works in both face frame and frameless applications.
KREG DRAWER SLIDE MOUNTING TOOL
KR03216 ................................................$39.99
Shelf Pin Drilling Jig
This jig provides a quick and
accurate way to drill shelf pin
holes in any project. It precisely spaces shelf pin holes 1.25"
apart, at either 37mm or 64mm
from the edge of your work. By
indexing the jig with a shelf pin,
any length may be drilled. The
shelf drilling jig comes with a 1/4"
self centering drill bit.
JIG BH19651 .........................................$35.95
5MM BH19139 .....................................$10.95
1/4" BH19138 ....................................$10.95
Drawer Slides
Our side mounted, telescopic, full extension drawer
slides carry heavy loads smoothly and silently with the
help of double ball bearing raceways. With a 100 lb rated
on an 18" size, this rust resistant, nickel plated steel slide
incorporates a positive "anti bounce back" when closed.
The slides measure 1/2" thin and 1-3/4" high.
FULL EXT DRAWER SLIDE
These slides have a 100 lb. rating
10" / PAIR
12" / PAIR
14" / PAIR
16" / PAIR
18" / PAIR
20" / PAIR
22" / PAIR
24" / PAIR
WY10069 .............$12.95
WY10062 .............$12.95
WY10013 .............$12.95
WY10015 .............$14.95
WY10016 .............$15.95
WY10017 .............$16.95
SL20124 ..............$17.95
SL20123 ..............$18.95
Soft Close
SOFT CLOSE DRAWER SLIDE
14" / PAIR SL30114 ..............$17.95
16" / PAIR SL30116 ..............$18.95
18" / PAIR SL30118 ..............$20.95
20" / PAIR SL30120 ..............$21.95
22" / PAIR SL30122 ..............$22.95
SOFT CLOSE HINGES
105° Face Frame Euro Hing SL33129 .......$2.99
110° Full Overlay Euro Hinge SL33131 .......$3.49
110° Half Overlay Euro Hinge SL33132 .......$3.79
110° Full Inset Euro Hinge
SL33133 .......$3.79
0mm Mounting Plate / For Soft Close
SL33000 .............................................................$0.49
1,000’s of Products Available Online: www.woodworkingshop.com 107
